Indiana University
  •  
  •  
  •  

Ringer volume and tone

On this page:

Back to top

Single-line Caller ID telephones

Setting the ring tone

  1. Ensure that the ringer is turned on and press Set Options.

  2. Use the Review key to scroll up or down to the 3, or press 0 and 3 to go directly to the item.

  3. Press * and follow the instructions on the display.

  4. When you are satisfied with your ring tone and ringer volume, press Save, and then press RLS.

Note: You cannot turn the volume off when you are choosing the ring tone. You can control the volume of the ring, the volume of the receiver, and the volume of the speaker by pressing the Volume Control Bar to the left or right side when activating these options.

To adjust your ringer volume

While the telephone is ringing, press the left or right side of the Volume Control Bar to increase or decrease ringer volume.

To turn the ringer on

  1. Press the right side of the Volume Control Bar until you reach the desired ring volume.

  2. Press Save.

To turn the ringer off

  1. Press the left side of the Volume Control Bar until the ringer is off ("Ringer is OFF" will appear on the display).

  2. Press Save.

Back to top

Two-line Caller ID telephones

To set the ring tone

  1. Ensure that the ringer is turned on and press Set Options.

  2. Press * to enter the options list.

  3. Use the arrow up/down key to scroll to number 1, or press 1.

  4. Press 1 and follow the instructions on the display. When picking the ring tone, press the Volume Control Bar to adjust the volume.

  5. When you are satisfied with your ring tone and ringer volume, press Save, and then press RLS.

Note: Repeat these steps to set up the ring tone and volume for the other line. You can control the volume of the ring, the handset, or the speaker during an active call by pressing the Volume Control Bar to the left or right until you reach to the desired volume.

To adjust your ringer volume

While the telephone is ringing, press the left or right side of the Volume Control Bar to increase or decrease ringer volume.

To turn the ringer on

  1. Press the Volume Control Bar.

  2. Press Line 1 or 2.

  3. Press the right side of the Volume Control Bar until you reach the desired ring volume.

  4. Press Save.

To turn the ringer off

  1. Press the Volume Control Bar.

  2. Press Line 1 or 2.

  3. Press the left side until you see that the ringer goes off ("Ringer is OFF" will appear on the display).

  4. Press Save.

Note: Do not lift the handset while you are turning the ringer on and off.

Back to top

Panasonic Model KX-T2355 Easa and ATT 925 Speakerphone

The three positions are High, Low, and Off. UITS recommends that you select either High or Low. In the Off position, the telephone will not ring.

Back to top

Vodavi

To set the Ringer Volume Switch

The switch is located on the right side of the telephone. You may set the switch to HI for high volume, LO for low volume, or OFF to turn the ringer volume off. When the switch is moved to the OFF position you will not hear ringing from the telephone. However, an extension telephone will ring during an incoming call.

To set the B/Z type ringer

The B/Z type ringer switch is located on the bottom of the phone near the Line jacks. This switch should be set to the Z mode for business/hospitality applications and the B mode for residential applications.

Note: The Message Waiting light and the Line in Use (LIU) LEDs will not operate when the phone is set in the B ringer mode.

Back to top